Select Page

Hertz HCP 1DK

£419.99

The brand new Hertz HCP 1DK provides almost twice the power of the HCP 1D. Now rated at an impressive 740 Watts RMS into 4 Ohms, this compact monster will happily drive a 2 Ohm load producing a whopping 1240 Watts RMS.

SKU: HCP 1DK Categories: , , Tag:

Description

  • Compact design built from extruded aluminum heatsink with the top side effective transfer of the heat generated
  • Special balanced high-noise rejection input circuitry on the Pre-In or Speaker-In inputs.
  • Speaker-In (for OEM head units) and RCA-In (for Aftermarket head units) inputs.
  • Selectable ART, Automatic Remote Turn-On/Off function, automatically turns on and off the amplifier when the OEM radio turns on and off (can be enabled/disabled, with only Speaker-In inputs).
  • Power supply featuring multiple winding transformer, Low-ESR 105°C capacitors,D-Class 2 Ω stable output stage.
  • Pre-outs, also available when using Speaker-In level inputs, equipped with Hi-Pass bfilter with adjustable 12 dB/Oct. slope with continuity between 50 and 250 Hz, providing the ability to create Front + Sub multi-amplification active systems.
  • Adjustable Bass Boost (50 Hz) with continuity between 0 dB and 6 dB, for more punch from the subwoofer.
  • Full-range and Lo-Pass crossover filters with 24 dB/Oct. slope and variable frequency (50 Hz – 250 Hz), both selectable, with a greater application versatility for the design of active systems.
  • SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to prevent damage to the subwoofer. Continuously adjustable PHASE control (0 to 180°); it optimizes alignment of woofer bass frequencies with sub ones.
  • Optional Remote Volume Control (HRC); providing the ability to adjust subwoofer volume level from the dashboard.

Technical Specification

Channel mode 1 Output Power (RMS) @ 14.4 VDC
1 Ch: 740 W x 1 (4 Ohm)
1 Ch: 1240 W x 1 (2 Ohm)
Filters
Hi-Pass 50 250 Hz @ 12 dB/Oct.
Lo-Pass 50 250 Hz @ 24 dB/Oct.Band-Pass
Subsonic 25 Hz @ 24 dB/Oct.
Distortion – THD (100Hz @ 4 Ohm)0,25 %
S/N Ratio (A weighted @ 1V) > 100 dB
Damping factor (100Hz @ 4 Ohm) > 100
Size W x D x H
mm (in.) 315 x 190 x 50 (12.40 x 7.48 x 1.97)